One (1) domed, self-adhesive sticker badge bubble-domed for 3D appearance. Perfect for decorating your equipment case.
Logo: Western Digital WD_BLACK SN850 NVMe
Type: Domed badge / sticker
Quantity: 1 (one)
Dimensions (inches): 1 inch by 1 inch square
Dimensions (millimeters): 25.4 millimeters by 25.4 millimeters square
Dimensions (centimeters): 2.54 centimeters by 2.54 centimeters square
This Western Digital WD_BLACK SN850 NVMe logo badge is self-adhesive and can be attached to a flat or slightly curved, clean and smooth surface. For best results, clean the target surface with rubbing alcohol and let it dry completely. Then simply peel the Western Digital WD_BLACK SN850 NVMe logo badge from its backing sheet and attach it to the target area by firmly pressing it in place. Pressure-sensitive adhesive starts to work when the label is pressed against the application surface and achieves full strength within 24-48 hours. Do not remove the Western Digital WD_BLACK SN850 NVMe logo badge once applied as this will weaken adhesion when re-applied and the use of an additional adhesive (not included) may be needed to re-apply the badge. While the vast majority of users this is a non-issue, for some textured, oily, dirty, or otherwise low energy surfaces additional adhesive (not included with the product) may be required, therefore adhesion to all surfaces is not guaranteed for this product. This Western Digital WD_BLACK SN850 NVMe logo sticker badge is intended for indoor use only and should not be exposed to the elements for a prolonged time.